Switch Panel. Anodized aluminum plate. 6 switches with breakers and 6 2 three Amp., 2 Amp six., Eight 1 Amp. and ten 1 Amp. 12 volts. Dimensions: 116 x 165 mm.

Elastic shock cords with plastic balls. Nylon

Extend the shock cord with care, if it whips back out of control it may cause serious injury. Do not stetch it to more than 175% of the length at rest. Do not stretch the shock cord towards your face.

Kappa Inflatable Lifejacket, Auto, Adult,180N, ISO 12402-3 with double crotch

• Single yellow fluo chamber with increased buoyancy 180Nt (approved to ISO 150N)
• The lifejacket has been designed according the requirements of ISO 12402-3 & ISO 12401 as last amended
• Can be inflated via LALIZAS Auto inflator (20260, certified per ISO 12402-7)
• CO2 cylinder 38gr
• Equipped with oral inflator tube with non return valve (20610 certified per ISO 12402-7)
• Made of Nylon ripstop with PU coating and neoprene fabric for neck and chest areas
• Whistle (70010, certified per ISO 12402-7 & ISO 12402-8)
• Structural raw materials tested according to ISO 12402-7
• Gross Weight: 1,4kg (72194) - 1,48kg (72195) 
• SOLAS Retro Reflective tapes according to ISO 12402-3
• Retro reflective tapes, Solas Approved
• Heavy Duty soft D-ring, tested per ISO 12401 requirements

Automatic inflation Lifejackets are designed to provide the best security at the best price for everyone. Its compact design, low weight and high quality are a derivation of our vest Omega, leader in its class.

They are fitted with a handle for easy rescue.

It consists of a camera that can be inflated by a manual operation valve (20220, certified ISO 12402-7) or by automatic shooting Lalizas (20260, certified per ISO 12402-7), plus oral inflation tube that incorporates a Lalizas valve (20610, ISO 12402-7 certified). This inflatable chamber made of a high visibility yellow tissue, is folded into a red nylon carrying case.

The jacket is also equipped with reflective tape (70180) and whistle (70020, ISO 12402-7 certified and 8).

Protective covers for Raymarine electronic equipments.

Made of high strength plastic and valid for models  ST60 / ST6002.

PILOT WITH HARNESS (ISO 12402-3). Category Vest 150 Newtons. Ensures the flare. Swollen automatic, firing of a bottle of 24 g of CO2. Red cover. Air chamber fluorescent yellow retro-reflective bands. Equipped with a carrying handle and a crotch strap.

An inflatable vest is re-usable: enough just to change the CO2 cartridge and eventually chip or cartridge drum machine, and return to fold. See reference replacement kits on the following pages. In the Family model, the air is incorporated into the cover. It is a lightweight vest, easy folding after use.

PILOT WITH HARNESS (ISO 12402-3). Category Vest 150 Newtons. Ensures the flare. Swollen automatic, firing of a bottle of 24 g of CO2. Red cover. Air chamber fluorescent yellow retro-reflective bands. Equipped with a carrying handle and a crotch strap.

An inflatable vest is re-usable: enough just to change the CO2 cartridge and eventually chip or cartridge drum machine, and return to fold. See reference replacement kits on the following pages. In the Family model, the air is incorporated into the cover. It is a lightweight vest, easy folding after use.

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 750 Gph a tube of 19 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Capacity: gallons per hour: 750 gph (2850 l x hr)

The graduated fridge jug from the Happy Hour line is made of clear plastic and has a practical lid.

It is designed to fit in the apposite place in the fridge and contains up to 1 litre.

Designed by Bruno Gecchelin

The Fender Step is a patented combination boarding step and fender. It is manufactured from the same injection moulded PVC construction as inflatable fenders. The unique shape provides hull protection as well as a boarding step. The unique shape provides hull protection as well as a boarding step. The high topsides of many modern vessels make boarding difficult from either a marina finger or from small dinghies. The combined fender and step feature allow it to be rigged before entering a marina, allowing the crew to safely and easily step onto the pontoon without resorting to leaping.

• Weight: 2 kgs.
• Colour: White..
• Eye diameter: 18mm.
• 205mm x 400mm x 400mm