The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult. Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting. Optimum safety No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle. In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately. Simple installation and maintenance Installing the pump is extremely simple : all done from the cockpit. The diaphragm can be removed within seconds ; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary. Construction from materials impervious to UV-rays. Design One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult. Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting. Optimum safety No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle. In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately. Simple installation and maintenance Installing the pump is extremely simple : all done from the cockpit. The diaphragm can be removed within seconds ; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary. Construction from materials impervious to UV-rays. Design One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

High flow pump without priming. Detachable, usable in all positions. Output per stroke: 0.75L, min. dimenions: 630 mm and stroke: 480 mm

High flow pump without priming. Detachable, usable in all positions. Output per stroke: 1L, min. dimenions: 790 mm and stroke: 640 mm

Unbreakable, floating polyethylene.

The cube of rubber is not deformed properties, sound-proof, rustproof and easy to clean, allowing a longer durability than conventional hubs. Capacity 7 liters and aluminum handle with eye.

Plastic bucket with eye loop.

10 liters capacity.

Set of 9 conical wooden plugs :

• 3 x 110 mm high x Ø 29-19 mm*
• 3 x 110 mm high x Ø 39-29 mm*
• 3 x 110 mm highx Ø 50-40 mm*

Set of 9 small conical wooden plugs : 2 x 40 mm hight x Ø 10-4 mm* 2 x 50 mm high x Ø 16-8 mm* 2 x 60 mm high x Ø 22-14 mm* 2 x 70 mm high x Ø 30-18 mm* 1 x 80 mm high x Ø 35-25 mm*

Moulded in highly resistant plastic ; all metal parts in stainless steel. Easily removable diaphragm. Multi-mounting position bilge pump : up to 8 possible mounting positions. Horizontal or vertical mounting. Pump comes complete with 2 outlets Ø 25 mm. Technical specifications : Capacity output: 0.5 l, per stroke, at 1 m height. Maximum lift: 3 metres. Weight: 0.500 kg. Hose diameter: 25 mm