Combine sturdiness, simplicity of use and high efficiency :

• Motor is automatically operated by a reliable mechanical float switch (non toxic ; contains no mercury).
• Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow of water around the motor housing keeps motor cool for extended life.
• 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures perfect alignment of shaft and seal, thus preventing leaks.
• Durable impeller is made of tough, high-impact, glass filled polyester.
• Re-inforced filter for optimum protection of the impeller.
• Test knob allows for easy and immediate operational check without disassembly.
• Compact size and low-profile design allow installation in tight places.

Resistant to shock and hydrocarbons. Motor protected by rubber boot for a total sealing and better cooling.Metal seat.

ISO 15083 standard requires the following minimum performance, at a 1 m height:

• Boat  6 meters: 600L/hour
• Boat  6 meters: 900L/hour
• Boat  12 m: 1800L/hour

A-MATIC RULE 35A.

Automatic float switch, DC 12V/24V, 15Α max

This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch automatically turns the bilge pump on until the bilge is emptied. This automatic float switch has a plastic housing.

• Power: 12V/ 24V,
• Fuse: 15A max,
• Material: ABS plastic,
• Dimensions: L 11cm W 7cm H 6.5cm

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 1000 Gph a tube of 25 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Fuse: 10A
• Capacity: gallons per hour: 1000 gph (3700 l x hr)

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 750 Gph a tube of 19 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Capacity: gallons per hour: 750 gph (2850 l x hr)

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 600 Gph a tube of 19 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Fuse: 10A
• Dimensions (L x W x H): 145 mm x 82 mm x 90 mm Hose: 19mm
• Capacity: gallons per hour: 600 gph (2270 l x hr)