Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 750 Gph a tube of 19 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Capacity: gallons per hour: 750 gph (2850 l x hr)

Combine sturdiness, simplicity of use and high efficiency :

• Motor is automatically operated by a reliable mechanical float switch (non toxic ; contains no mercury).
• Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow of water around the motor housing keeps motor cool for extended life.
• 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures perfect alignment of shaft and seal, thus preventing leaks.
• Durable impeller is made of tough, high-impact, glass filled polyester.
• Re-inforced filter for optimum protection of the impeller.
• Test knob allows for easy and immediate operational check without disassembly.
• Compact size and low-profile design allow installation in tight places.

Suction hand pump, length 160cm, 19mm.

Suction hand pump, length 160cm, 25mm.

The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult. Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting. Optimum safety No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle. In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately. Simple installation and maintenance Installing the pump is extremely simple : all done from the cockpit. The diaphragm can be removed within seconds ; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary. Construction from materials impervious to UV-rays. Design One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

Resistant to shock and hydrocarbons. Motor protected by rubber boot for a total sealing and better cooling.Metal seat.

ISO 15083 standard requires the following minimum performance, at a 1 m height:

• Boat  6 meters: 600L/hour
• Boat  6 meters: 900L/hour
• Boat  12 m: 1800L/hour

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 1000 Gph a tube of 25 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Fuse: 10A
• Capacity: gallons per hour: 1000 gph (3700 l x hr)

High flow pump without priming. Detachable, usable in all positions. Output per stroke: 0.75L, min. dimenions: 630 mm and stroke: 480 mm

High flow pump without priming. Detachable, usable in all positions. Output per stroke: 1L, min. dimenions: 790 mm and stroke: 640 mm

A-MATIC RULE 35A.