Automatic float switch, DC 12V/24V, 15Α max

This float switch is designed for the automatic control of electrically driven bilge pumps. Designed with a reliable rolling-ball and switch system that prevents rapid on/off cycling found on some switches and is safer than mercury switches. When water lifts the chamber buoy up to 6cm, the switch automatically turns the bilge pump on until the bilge is emptied. This automatic float switch has a plastic housing.

• Power: 12V/ 24V,
• Fuse: 15A max,
• Material: ABS plastic,
• Dimensions: L 11cm W 7cm H 6.5cm

Moulded in highly resistant plastic ; all metal parts in stainless steel. Easily removable diaphragm. Multi-mounting position bilge pump : up to 8 possible mounting positions. Horizontal or vertical mounting. Pump comes complete with 2 outlets Ø 25 mm. Technical specifications : Capacity output: 0.5 l, per stroke, at 1 m height. Maximum lift: 3 metres. Weight: 0.500 kg. Hose diameter: 25 mm

Composed of activated carbon. Line is installed in the aeration tank circuit. The filter should be changed every year. Served with brackets.

Hose Ø 20-25 mm.

Mechanical elbow filter mounted with 12 mm (1/2")

Sistema compacto y silencioso que incluye caja con bomba Sahara.
Activación automática según el nivel del agua.

Materiales resistentes a la corrosión.
Vivienda equipada:

• Filtrado
• Tapa de plástico transparente con junta para fácil mantenimiento.
• Boquilla para tubo de drenaje de ¾" (19 mm)
• Boquilla para manguera de entrada de agua de ¾" (19 mm)
• Boquilla para manguera de entrada de agua de ¾" (19 mm) o 1" (25 mm)
• Boquilla para manguera de entrada de agua de 11/8" (28 mm) o 1½" (38 mm)
• Soportes de fijación para una instalación rápida y fiable (tornillos incluidos).

Caudal a nivel: 2156 L/h
Caudal a 1 m*: 1588 L/h
Caudal a 2 m*: 1097 L/h
Fusible: 5 Amperios.
Distancia al centro: E: 59 mm
Valores medidos para una tensión de 12 V nominal.

The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult. Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting. Optimum safety No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle. In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately. Simple installation and maintenance Installing the pump is extremely simple : all done from the cockpit. The diaphragm can be removed within seconds ; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary. Construction from materials impervious to UV-rays. Design One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

Submersible pump automatic bilge Lalizas combines quality and ease of use. It contains an automatic switch that activates or deactivates the pump as needed and avoiding burning engine for dry use. It has capacity for 600 Gph a tube of 19 mm. In addition a test button will tell you whether the pump and switch are working properly. I Esra made of ABS plastic. The base is attached and removed by clips, which facilitates installation and maintenance.

• Voltage: 12DC
• Fuse: 10A
• Dimensions (L x W x H): 145 mm x 82 mm x 90 mm Hose: 19mm
• Capacity: gallons per hour: 600 gph (2270 l x hr)